rent4event Event Technology: rent Video Control Equipment

S2-108HD Routing Switcher
tvONE

S2-108HD reclocking SD/HD-SDI Routing Switcher may function as an 8x2 standalone switcher or as an input expansion module for any of the C2-2000 series Scaler Switchers with SD/HD-SDI inputs to provide seven additional SD/HD-SDI inputs to those devices. Since the unit is fully compliant to SMPTE 292M and 259M, it can be used to switch SD-SDI and HD-SDI signals. The S2 Switcher connects to the C2 unit via an OPTION interconnect cable and is fully integrated into the control system of the host C2 unit.

Mobile Camera Control Desk 4K / UHD
rent4event

With this "director's case" the days of hours of setup, cabling and troubleshooting are finally over. Simply slide the mobile 4K / UHD camera control unit into the desired position, open the lid, plug it in and you are ready for use in just a few minutes. We also offer you a comparable camera control in the FullHD version.

For up to 4 UHD camera trains Panasonic AK-UC3000 UHD
16 - compartment Multiview, Intercom, UPS, ATEM Broadcast Studio 4K
Dimensions: 180 x 60 x 100 cm (H x W x D)
Weight: 250 kg
Completely pre-wired, ready for use in a flash
Connections easily accessible on the back (SDI In/Out, HDMI In/Out, Audio analog In/Out, Intercom, Network, Blackburst, TriLevel Sync, Timecode)
... and many other features

Mobile Camera Control Desk FullHD
rent4event

Before we designed the 4K / UHD variant of a mobile, fully pre-wired control station, we developed this FullHD version. This also offers all click-free features for up to 4 camera trains. We recommend Sony HSC-100R or Sony HXC-100 for full compatibility. In addition to saving a lot of time and nerves, you can rent this mobile HD camera control station:

A complete HD control room for up to 4 HD camera trains Sony HSC / HXC 100
Blackmagic Atem 2 M/E Constellation HD
40 x 40 SD/HD/3G-SDI matrix switcher
16-fold SD/HD/3G-SDI Multiview
28" 4K display for Multiview
32" Class A Monitor
Smart UPS 1500 VA
Measuring station incl. Vectorsope and Waveform
Ultrastudio 4D
Apple Mac mini I5 as a configuration / presentation computer incl. Office / Keynote / Wirecast for live streaming
Image Pro HD
Riedel Intercom System
8-way audio mixer
fully wired, setup time approx. 10 minutes
More pictures coming soon

E2 Event Processor
Barco

The Barco E2 Event Processor sets new standards for screen management, offering outstanding image quality, exceptional input and output density, and outstanding expandability. It supports native 4K input and output and is the only screen management system on the market that can manage 4K projector blending at refresh rates up to 60Hz with 4:4:4 color sampling and 12-bit processing.

Native 4K inputs and outputs
Excellent input and output density
Can manage 4 projector crossfading at up to 60 Hz
8 mixable PGM outputs and 4 scaled AUX outputs
Simple, cross-platform touchscreen user interface
See also: Barco EC-50 Event Controller

EC-50 Event Controller
Barco

Barco's Event Master EC-50 event controller provides instant access and superior situational awareness for all types of deployments such as trade shows, corporate events and even music events. Suitable for Barco E2 Event Processor.

Full-control USB device for Event Master GUI
Its small footprint makes it ideal for most control environments
Easily accessible sources, presets and one-touch dialing functions< /li>

Ascender 32 (ASC3204)
Analog Way

The powerful multi-screen seamless switcher is based on Analog Way's LiveCore™ platform and offers state-of-the-art processing, soft edge and 4K support for world-class presentations.

LiveCore™ platform
12 seamless inputs and 42 input ports
Independent preview/mosaic/monitoring output
Complete live preview of all sources ( Preview/Mosaic/Monitoring)
Customization of the monitoring layouts (up to 8 layouts can be saved)
4 true seamless scaled layers + 1 native background layer
Advanced Layer Management
Outputs rotatable in 90° increments
First-class visual effects
Communicative structure
Robust and stable design
User-friendly and intuitive graphical interface
Remote control functions
Expandable modularity

VIO 4K (V701)
Analog Way

Rent the ultimate toolbox for video processing / seamless switching with a web-based user interface for remote control (Web RCS) and TCP/IP control protocol.

The all-in-one solution for every conversion
User-friendly and intuitive graphical interface
Multiple audio/video cards available for system expansion
Advanced features for LED walls
10-bit 4:4:4 processing with extremely low latency
New high-quality ARTIS® Scaling Engine

PDS-902 3G
Barco

The PDS series is designed to meet today's needs for a high quality, easy to use and fast seamless switcher with more digital inputs. Thanks to its uncomplicated setup and operation, the PDS is perfect for any type of live event.

4 x VGA input
4 x DVI-I input
1 x 3G SDI input
1 x program output
1 x preview output

PDS-902
Barco

4 x VGA input
4 x DVI input
1 x SDI input
VGA / DVI output

AV-HS450 Switcher
Panasonic

The Panasonic AV-HS450 is a 1ME digital video mixer that supports multiple HD and SD formats. It consists of a mainframe and a control panel or remote panel.

16 HD/SD-SDI inputs
2 DVI inputs
4 AUX buses, 2 PiPs
4 HD/SD-SDI outputs , 2 DVI outputs
2 multiviewer outputs
16 frame synchronizer
4 upconverters
Dual screen multiviewer (up to 16 images on one or 20 on both)
Support 10 bit 4:2:2, 1080/50i, 720/50p, 576/50i

MX16x16DVI-Plus Matrix Switcher
Lightware

Route up to 16 x 16 DVI 1.0 signals with the matrix router Lightware MX16x16DVI-Plus - with a resolution of 1920 x 1200 or 2048 x 1080 pixels. The whole thing can be controlled via Ethernet, RS-232 and RS-422.

Routes up to 16 x 16 DVI 1.0 signals
maximum resolution 1920 x 1200 or 2048 x 1080 pixels
RS-232 or RS-422 as well as Ethernet Control< /li>

MX8x8DVI-HDCP-PRO
Lightware

The standalone DVI Plus matrix router Lightware MX8x8DVI-HDCP-PRO processes single-link DVI signals via various DVI inputs or DVI outputs, whereby all inputs are forwarded to any combination of outputs.

Perfect for dynamically changing environments
processes DVI-D and HDMI signals with HDCP support
RS-232 port
TCP/IP LAN connection
Crosspoint switching occurs immediately without frame delay or frame latency.

ImagePRO HD
Barco

The Folsom ImagePRO™ is a powerful HD all-in-one signal processor that accepts a variety of video input signals and processes them into a variety of different signal formats to meet the video requirements of virtually any HD application.

Advanced Multi-Format Processor
Converts any video format to any other video format
Up/Downconverter
Seamless Switcher
Frame Synchronizer
LED wall processor
Scaler, transcoder and much more.

ImagePRO-II Dual
Barco

The ImagePRO-II™ is a powerful all-in-one video scaler, scan converter and switcher, and transcoder. The ImagePRO-II converts a variety of user-selectable video input signals - including RGB, HDTV, DisplayPort, HDMI, Component, S-Video, Composite (NTSC, PAL) and HD/SDI - into an impressive range of output signal formats.

Advanced Multi-Format Processor
Converts any video format to any other video format
Resolution up to 2560 x 1600
Supports DVI, 3G-SDI, HDMI, DisplayPort and analogue
Dual outputs
12-bit processing
and much more

VS-41 HDCP
Kramer Electronics

The Kramer VS-41 HDCP is a high-quality 4x1 switcher for DVI signals that supports a maximum data rate of up to 6.75 Gbit/s and is suitable for resolutions up to UXGA at 60 Hz as well as all HD resolutions. It equalizes the signal and sends one of the 4 inputs to the DVI output.

4-way DVI switch
EDID management
HDMI 1.4
3D pass-through

VS-41 HC
Kramer Electronics

The VS−41 HC is a high-performance switch for HDMI signals. It switches each of the four inputs to a single output.

4-way HDMI switch
2.25 GBit/s, HDCP, HDTV
EDID Management
HDMI 1.4
3D transmission

1T-DA-554 DVI Distribution Amplifier 1 in 4
tvONE

The tvONE 1T-DA-564 distributes 1 DVI input signal to 4 x DVI outputs. It has a high bandwidth (up to 225 MHz - 2.25 Gbit/s) as well as a Signal amplification and equalization for high audio and video performance processing, which enables signals to be transmitted over longer distances without loss of quality.

Multiple DVI outputs from a single source
Distribution to 2 or 4 outputs
Dolby Digital+, Dolby® Digital TrueHD and DTS-HD
10/12-bit color depth display
Supported HDMI with optional DVI to HDMI adapters
Signal equalization function for longer cable runs
Supports automatic detection of monitor EDID
Lockable DC connectors for security< /li>

x4 Display Controller
Datapath

The Datapath x4 is a standalone display wall controller with a standard single or dual link DVI input, which then offers flexible display options via 4 outputs (i.e. for 4 displays). Each output can be controlled as DVI or analog RGB and display any image section of the original. In addition, each output can be independently mirrored and rotated by 90°, 180° or 270° - e.g. for portrait/landscape configurations.

Numerous creative configurations
up to Ultra HD input, 4 HD 1080p outputs
rotates, crops, scales, mirrors and corrects the frame
Accepts dual-link DVI or single-link DVI inputs
Save configuration function during shutdown
Compatible with Mac OS X 10.6

Mini Converter UpDownCross
Blackmagic Design

UpDownCross converter includes both up, down and cross conversion as well as a 4 field standards converter! Fantastic for placement on deck SDI inputs, so you always get NTSC or PAL into the deck. Use the cross converter to convert 720p to 1080i or 1080i to 720p so you can edit once and master in SD, 720p and 1080i video!

Mini Converter HDMI to SDI
Blackmagic Design

The Blackmagic Design HDMI to SDI Mini Converter converts HDMI to SDI and embeds the audio input signal into the SDI output signal.

Converts from HDMI to SDI
Supports all SD and HD formats up to 1080p/60
Audio can be embedded from HDMI, balanced analog or AES/EBU inputs< /li>

Mini Converter SDI to HDMI 6G
Blackmagic Design

Mini Converter SDI to HDMI 6G lets you convert from SDI to HDMI in SD, HD, and Ultra HD formats while de-embeding audio to HDMI, AES/EBU or balanced analog audio. You also get advanced features such as down conversion for monitoring Ultra HD on HD HDMI monitors as well as built in 3D LUTs plus HDMI instant lock for instant video display when an SDI input is connected!

Teranex Mini Audio to SDI 12G
Blackmagic Design

Handles the task of weaving up to two channels of audio from balanced analog, fiber optic, or Hi-Fi RCA inputs, or four channels of AES/EBU digital audio into any SD, HD, Ultra HD, or DCI-4K-SDI video ports . Take the audio signal from devices such as audio mixers, iPods and analog decks and embed it into the SDI video connectors for use with SDI matrix switchers and decks.

For all SD, HD, Ultra HD formats up to 2160p60
Embedding of up to 2 audio channels (symmetrical analogue, fiber optic, HiFi RCA) or 4 channels AES/EBU Digital audio to any SD, HD, Ultra HD or DCI-4K-SDI video ports

Teranex Mini SDI to Audio 12G
Blackmagic Design

For extracting audio from any SD, HD or Ultra HD SDI video port and outputting two channels of analog audio to balanced XLR sockets, fiber optic or HiFi RCA sockets or for output of four channels AES/EBU digital audio. Ideal for converting and outputting SDI audio to a wide range of audio devices.

C2-6104A Video Processor
tvONE

The 4-Window Universal I/O Multiviewer features five fully HDCP-compliant Universal DVI inputs (including one for cascade or background use), allowing up to 4 resizable windows to be placed on a single DVI output screen can.

4 window processor
4 x high quality CORIO®2 scaling engines
HDMI compatible inputs and outputs
5 x DVI-U/HDMI inputs (resolutions from baseband to 1920 x 1200)
HDCP compatible
Supports embedded HDMI audio

nanosyncs HD
Rosendahl

With the introduction of high-resolution video standards, the synchronization of digital audio and video signals became increasingly important and demanding. The Rosendahl nanosyncs HD is a professional video and audio synchronization reference generator.

Audio Word Clock
AES/EBU reference
Video Sync
Tri-Level Sync
Timecode Generator< /li>

UltraStudio 4K
Blackmagic Design

Blackmagic UltraStudio 4K provides you with almost any connection to integrate professional decks, monitors and other devices. This also makes it suitable for equipment racks or in post-production studios to place on a table or in an editing station.

Ultra HD and 4K recording and playback
SDI, HDMI, Analog, Timecode, AES/EBU interfaces
Balanced and unbalanced analog audio
Stereoscopic 3D two-channel recording and playback possible

UltraStudio 3D
Blackmagic Design

Blackmagic UltraStudio 3D is a video capture and playback device with Intel's Thunderbolt™ technology. It's compact, portable, cheap to rent, yet offers high performance for SD, HD or 2K recording and playback.